View Single Post
Old 11-21-2007, 01:41 PM   #8 (permalink)
WilD
Exterminate!
 
WilD's Avatar
 
Join Date: Mar 2006
Location: The Motor City
Send a message via AIM to WilD

Brass N Wood Fan
Palmers Fan
RTP Fan
Quote:
Originally Posted by LUKE View Post
I have a set of SP wood grips on a 45 frame for one of my pgp's...I'm interested in trying to fit a set directly to a sheridan frame, as long as it looks clean.
You'll want to start with the wood grips form a cocker/mag frame rather than the 45 version. As others have mentioned, the area near the trigger guard is where the grips need to be cut. It is really quite simple, and you should be able to see where the material needs to be removed by placing a grip panel over the frame to see where it doesn't match. The grip will also be longer than the frame, most people leave that alone, but you could cut them to match the length of the frame if you so desired. I did this with some pastic grips and it was an easy process with a dremel.
WilD is offline   Reply With Quote