Thread: K Framed P68SC
View Single Post
Old 11-06-2012, 11:52 AM   #7 (permalink)
chplnstone
brassmage and necrotech
 
chplnstone's Avatar
 
Join Date: Jan 2007
Location: cape may, new jersey

valves are the same overall length, cocking issues with the pgp2k are typically the back block being screwed in too far, but with a k-frame that shouldn't be an issue... other easy-solve problem is the rva being screwed in too far, preventing the hammer from being able to come far enough to hang on the sear. if it's still not cocking, pull the k-frame off the marker and make sure the hammer physically fits between the sear and the back block of the frame.
__________________
Chaotic Creations Ltd. http://www.mcarterbrown.com/forums/a...ml#post2095803 ---currently buried in work!

looking for: working ATS preferably with straight asa, brass sheridan donors/bits, vert feed micromag/ule body, green/camo SP wood grips for cf frames

happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html
chplnstone is offline   Reply With Quote