View Single Post
Old 11-12-2012, 08:26 PM   #3 (permalink)
HP_Lovecraft
Post Whore
 
HP_Lovecraft's Avatar
 
Join Date: Aug 2006
Location: Southern Maine

Quote:
Originally Posted by toymachine View Post
Of course chopping and sub par velocity was a major draw back/problem, but with a longer spring, larger hammer and serious buffers/bumpers (kinda like a 68 special) it goes to the point where it would kinda work using a warp feed.
The hammer going full-auto probobly cycles at a rate of 40-45cps. That is faster then any hopper can reliably feed. Remember, with out eyes, the hopper has to feed every round, from first to last at that speed speed, which is impossible since the last few rounds in the stack will only feed at the speed of gravity.

Its one of those things. Its really easy to get the gun to fire f/a. Basicaly, make the slip-sear not slip. But slowing the hammer, and increasing the feed are 2 hurdles that have never really been done easily. Look how complicated the Tippmann F/A ended up being. Forcefeed hopper AND dual hydraulic shocks to slow the hammer... and it still was unreliable.
__________________
www.montneel.com

"the evidence strongly suggests that neither Billy nor Adam (Smart Parts) could have invented the electronic paintgun" -Garr M. King, U.S. Judge
HP_Lovecraft is offline   Reply With Quote