11-19-2012, 04:22 PM
starts off small at first
Join Date: Apr 2006
Location: Bean Town, U.S.A.
Originally Posted by LilShank
It is a mild steel, used for a while until it too ran into bending/breaking problems.
Brian had told me he had intended to do the latest ones in brass, though I'm not sure that is the case anymore (mostly because of cost I believe, though I told him the brass would be much better than the aluminium he had been using, regardless of series)
EDIT: To add, I think that the brass would be stronger, while being easier to machine than SS. I could see where anodizing the current designs would help tolerances, albeit the fact that the anodizer they use tends to have anno that's on the thin side (just look at all the dust black Gen1's, heck my feed tube got scratched just from being put on my desk.)
And to throw my hat into the ring, I do like the current version of the piston, I still use the "thinner" one as of right now with no issues. Taking the "set it and forget it" approach has worked out for me so far
you're experience is one in a thousand. Maybe just luck, but damn... Why is it that yours works so nice? Never mind. There is no explanation.
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods. splattttttt land