View Single Post
Old 12-01-2012, 03:49 PM   #9 (permalink)
cfos00
Midget Enthusiast
 
cfos00's Avatar
 
Join Date: Jul 2008
Location: Washington, DC
Send a message via AIM to cfos00

Claudio (Rainman) fixes them. He fixed mine and told me what the problem is that actually causes them. The tubes end up with cracked resin because of people overtightening the screws, usually the front grip frame. When you do that, it pushes up into the lower tube, moves it, and cracks that resin. Claudio fixes them by adding a couple o-rings, and re-doing the resin. Why they didn't come with a couple o-rings in there to begin with is beyond me. I would recommend NOT using JBWeld. It doesn't tend to hold very well and mucks the body up. He doesn't charge much to fix them, and does a great job. Talk to him. You won't be sorry.
__________________
My feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html

Need a Centerflag Uprising manual? PM me.

My Shooters
http://customcockers.com/forum/showt...514#post386514

Looking for a Twister body and back block!!
cfos00 is offline   Reply With Quote