View Single Post
Old 12-03-2012, 09:11 PM   #1 (permalink)
Stilgar
Walking without rhythm
 
Stilgar's Avatar
 
Join Date: Jul 2009
Location: North of 49

CCM Fan
Brass N Wood Fan
Palmers Fan
Sheridan Woes...

OK, I have come to the end of my ability to figure out what the F my sheridan is doing...

Just so you sheridan wizards of MCB can see what I am talking about...







It is basically custom brass with KP2 guts...Cart Valve, KP2 hammer, Spring and trigger group...

I have replaced ALL of the seals, and Orings...I got a new Valve stem...

I cannot stop the thing from leaking down the barrel...

I put a 12g in, it will pierce and some times it holds and some times it vents right away... If it doesn't vent right away it does after about 3 or 4 shots.

I figured that the valve stem seal just needed to set its self in to the valve stem as it is pretty fresh. So I aired it up and left it aired up for about two weeks with the hope that the pressure would make the seal snug...

After taking a shot with it every two or three days for about two weeks, I figure "OK problem solved!" So I mount the brass in its stock, pump it, pull the trigger and it vents...again...

So MCB I turn to you and your infinite collective wisdom! What the HELL do I do now?
Stilgar is offline   Reply With Quote