Thread: S6.5 leak
View Single Post
Old 12-03-2012, 10:59 PM   #7 (permalink)
Formerly lancecst
BLachance75's Avatar
Join Date: Sep 2006
Location: Western Mass

I don't believe they loctite the fittings when they are new. They do that so you can change what side the fitting is on. Put either Teflon tape or blue loctite on the macro fitting and plug.

By pump first he means that you have to pump the gun before you gas it up. If you don't the hammer sits against the valve and air vents out of the barrel.
BLachance75 is offline   Reply With Quote