View Single Post
Old 12-04-2012, 07:00 PM   #2 (permalink)
ApoC_101
Doesn't work for Avratech
 
ApoC_101's Avatar
 
Join Date: Aug 2007
Location: Vancouver, BC

how much resistance is the trigger return spring adding? the stock CCI hammer/sear to bolt interface doesn't take much to let go... I've never cut the sear down on one of them and I don't really recommend it unless you've got an extra one in the parts kit... may cause it to catch unreliably and fire too easily, yunno?

I'd take off the trigger frame and see if swapping out the trigger spring will reduce it's weight, get it to minimal sufficient return tension and then tweak the hammer/sear after that
ApoC_101 is offline   Reply With Quote