View Single Post
Old 12-10-2012, 12:13 PM   #4 (permalink)
The Inflicted
.
 
The Inflicted's Avatar
 
Join Date: Sep 2008
Location: Chattanooga, TN

The old Brass Eagle 12-gram adapters they packed in with the original Stingray had a rear knob which was ASA-threaded, so you could use one of those in conjunction with an ASA-threaded stock (like a Smart Parts "smart stock") to do what you wanted.

I found, though, that depending on the brand of 12-grams used, the stock didn't quite push the cartridge in far enough to seal it, so a couple washers or dimes sandwiched behind the cartridge was needed. If I were going to run this thing long-term I would have probably tried tapping the inside of the male end of the stock and putting a nice chunky bolt in there.






photo sharing
The Inflicted is offline   Reply With Quote