View Single Post
Old 12-12-2012, 09:00 AM   #11 (permalink)
ironnerd88
Four-eyed Freak
 
ironnerd88's Avatar
 
Join Date: Apr 2006
Location: Atlanta, GA

OKAY... I may be on to something.

The valve-retainer and power tube in the gun are both out of a Phantom, meaning the actual diameter of the sealing surface is different from the intended diameter. I'm thinking that the delrin sealing surface on the cup seal is not properly contacting the larger OD of the valve retainer.
__________________
"Sorry, I'm programmed to do that..."

Last edited by ironnerd88; 12-13-2012 at 06:44 AM.
ironnerd88 is offline   Reply With Quote