View Single Post
Old 12-17-2012, 10:21 PM   #6 (permalink)
Rec Poster
Paintballer231's Avatar
Join Date: Mar 2009

Originally Posted by dano_____ View Post
Is the valve retension screw in too far? On my mq2, it would be leaky if it was in too far.

Mine reliably sealed up until about 350 psi so if you can't get above 200, something is wrong. Are you sure your pressure gauge is correct? Also some valves like a longer dwell, I had mine at 8ms and it purred.

Gauge is correct .
Valve screw is fine

My leak is pilot valve only.
Paintballer231 is offline   Reply With Quote