Thread: Leaking Mag
View Single Post
Old 12-22-2012, 12:28 PM   #12 (permalink)
secretweaponevan
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: Pocono Lake, PA

Quote:
Originally Posted by ilivlife View Post
I do not have that
There is your problem! A missing bushing will cause the body/valve to slide back on the rail, causing the bolt to be held by the sear in a position forward of the powertube o-ring, allowing a big leak.
While your marker is gassed up, push on the back of the velocity adjuster hard, and the leak should stop.
__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is offline   Reply With Quote