View Single Post
Old 12-26-2012, 08:49 PM   #4 (permalink)
arjames
gotlvnvtosgi
 
arjames's Avatar
 
Join Date: Apr 2012
Location: North CA

Probably hpa (high pressure air). A custom manifold would look the best. You could use some 15 deg asa's from an autococker. And a tank regulator. If you didn't have on/off valves on each one (I Recommend valves) you would have to keep them together like one tank. (assembling them empty then filling all together possibly damaging the tank regs?) Otherwise it would be impossible to screw 3 in at the exact same time. This would have to be very well made and be strong there would be all sorts of spots it could leak. I would recommend a local machine shop or one of our air smiths. But don't expect it to be cheap. Or (if your on a budget) you could use 3 on off asa's mounted on a rail and some proper fittings from the hardware store all plumed together with macro line.
__________________
lever-action-sniper-production-prototype-design-poll http://www.mcarterbrown.com/forums/w...gn-poll-2.html

Last edited by arjames; 12-26-2012 at 08:56 PM.
arjames is offline   Reply With Quote