View Single Post
Old 01-07-2013, 11:10 PM   #7 (permalink)
minimag03
WVU paintball #19
 
minimag03's Avatar
 
Join Date: Aug 2006
Location: Greensboro, NC

I'm willing to bet the middle one is a Belsales valve since they produced the Eclispe valves.

The valve on the right does not appear to be stock. From the looks of the first pic, the bottom of the valve is solid. Stock valves are drilled all the way through. I think it's a Palmers LT valve that's missing it's easily noticeable stem. If you could get a better pic of what I'm talking about I can confirm it.

Upon second look, it's hard to tell for sure without a better pic looking straight down into the valve from the top. But I didn't think any stock valves weren't drilled completely through.

Last edited by minimag03; 01-07-2013 at 11:16 PM.
minimag03 is offline   Reply With Quote