Originally Posted by super_stanchy
when i built up a couple MQ builds, i took an IVG and cut it into 1/3 as thick... let you cut just that much more material off the body
why not do a no show midblock?
Thanks for the tip on the IVG, didn't think of cutting that down.
Perhaps no-show midblock is what I am envisioning? I haven't heard that term before. I'll be slotting for the bolt pin from below the marker, so there is no visible pin on the top and the upper structure of the body is retained. As much of the back of the marker will be removed as possible, but I intend for it to be a straight up and down cut. To remove the bolt, I will have to align the pin with the timing hole in the upper body, and push it out the bottom.
I'm probably describing it incorrectly. I will be using a sled and no backblock.