View Single Post
Old 01-19-2013, 04:14 PM   #2309 (permalink)
capitalpaintball
MCB Member
 
capitalpaintball's Avatar
 
Join Date: Jul 2006
Location: Coventry R.I.

it was found that you can use the spring return guide as a pump stop.
just un-thread the spring guide pin until the gun wont catch the sear then turn it in a few turns.
it seems to work. i found that when the tank is empty the pressure is to low and the valve will open, you could try a harder valve spring
capitalpaintball is online now   Reply With Quote