I came across these two oldies, they both have a leak and will need new o-rings! Being sold as is! Someone with time can get these shooting great!
First i have a Nightmare SB, has an constant air adapter, safety is missing the ball bearing but have the spring for it. This one leaks SOMETIMES, if you air it up and take a few shots it stops leaking. Also was able to chrono this and it is shooting right around 200 fps. So a new spring or washers would be needed.
Also this one must have been a home modification to make it direct feed as well, note the big hole in one side and custom made feed for it.
Second is a Nightmare SB Comp, also has constant air adapter, safety is missing the ball but spring is included. Put 2 new o-rings on the valve and oiled it up! The marker cocks and shoots. Also has the stock that was cut to allow for air tanks, there is a crack on both sides of the grip, could be fixed as they have not broken completely off. This one is shooting right around 160 fps- so needs a new spring.
$125 shipped Or buy both for $200 shipped will add all the extra stuff below for free!!!!
also have one of the rear plugs for 12 gram co2. First come first serve with the markers above.
Another adapter for constant air - 10 shipped
Remote setup for something possibly for a splatmaster- does not fit the nightmares- $20 shipped