View Single Post
Old 01-21-2013, 01:33 PM   #1 (permalink)
punisher068
MCB Member
 
punisher068's Avatar
 
Join Date: Mar 2009
Location: Santa Cruz Mountains

FS rounds casting burs

Bought a Hammer 7,my 1st experience with FS rounds
My 1st time shooting them I had some feeding issues,shortened the pump guide for bolt clearence and indexed the twist breech using a Freak insert seemed to fix this mostly
I noticed on the FS rounds alot of the fins had casting burs on them(to be expected for mass,cheap castings) and the front circles would hang up a bit on the mag round release
after "dressing' the rounds by sanding the from circles off and removing the fin burs I dry cycled the bolt with the barrel and detents removed,seemed to solve the problem
Is this a common problem with all FS compatible markers?Most of the FS i got were given to me by a fellow player who shoots a Tiberius,he had mentioned similar issues
Is there a shelf life for FS like paintballs?
__________________
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
My feedback
http://www.mcarterbrown.com/forums/f...-feedback.html
punisher068 is offline   Reply With Quote