View Single Post
Old 02-04-2013, 12:57 PM   #8 (permalink)
super_stanchy
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
PBN Fan
Quote:
Originally Posted by minimag03 View Post
Something is wrong. The reg should never have to be over 200psi, most run at 180. Dwell should be at 8ms with the stock bolt.

How far out was the backcap? It should only need to be about 1 turn out to get up to 300fps.

I'm guessing the poppet oring needs to be relubed or replaced. You might want to drop some oil in the asa and cucle the gun while you're at it.
where do you adjust it on the back cap?
uhhhh hmmmmm time to read the de-structions
super_stanchy is offline   Reply With Quote