View Single Post
Old 02-04-2013, 06:54 PM   #1393 (permalink)
splattttttt
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

Quote:
Originally Posted by Wizbaa View Post
My project phantom keeps moving along, after a lot of messing around I've got it running at 450psi, open TPC, blue main spring, and no valve spring. After a bit I decided to make a more streamlined cup. I was worried that the angled surface would reduce closing force, but it closes and holds air well.



I still don't have a chrono, but it feels like its shooting a decent FPS, around 250fps or so. What's really killing it right now is my bad paint to bore match, barrel is .686", my paint is .680 on the seam and all th way down to .655 around the rest of the ball. I'm thinking about picking up a small bore barrel, likely a 12" PPS brass in .680.
more of this and less hype please ( ;
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote