View Single Post
Old 02-07-2013, 04:40 PM   #7 (permalink)
facelesskillah
Newbie
 
Join Date: Dec 2012
Location: socal

no relation to the mq to the leaking "5-WAY" gasket seal. i had my lpr turned up from when it had the stock set up. but a lpr supposed to leak at 60psi as a safety. when i first took the solenoid out and the looked at the gasket it appeared it had glue on the gasket to seal the two parts together.
but i did get the new 5way gasket to seal with some dow33 and tightening the screws as tight as i could without stripping the heads out.
seems like just 2 screws makes for a bad seal. should be a minimum of 4
facelesskillah is offline   Reply With Quote