View Single Post
Old 02-09-2013, 11:24 PM   #4 (permalink)
Iconic Muffinman
Certified Gunsmith
 
Iconic Muffinman's Avatar
 
Join Date: Oct 2008
Location: Middletown, PA

Kilt Fan
The little side cover made the entire hammer bind and not be able to move at all, so it was promply ditched. I figure if the stock hammer didnt need a plate, the new one shouldnt either.

I do not have any other seals that will fit the hammer.. It appears to be the same type of material as a tank o-ring, and all I have are buna o-rings. Do you think this is the cause?

As you can tell, Im new to Tippmanns.
Iconic Muffinman is offline   Reply With Quote