View Single Post
Old 02-12-2013, 03:56 PM   #49 (permalink)
Pauly
Active Member
 
Pauly's Avatar
 
Join Date: Dec 2011
Location: Long Island NY

Update: Alright i did a ghetto bore job on my barrel (using tape) to get a tighter seal around the ball and i redid a 12 gram test.

Set-up: pre2k sniper stock valve, stock spring set, stock WGP reg set at 500psi. lapco t-stock with a 12 gram adapter screwed into the ASA.

My first test i ended up getting 24 usable shots. The only change was the rebore of the barrel which allow me to turn my IVG out about a turn and a half.

This test gave me 30 useful shots off of a powerlet.

I was getting alittle bit of hammer bounce so im going to try a stiffer valve spring when my madman kit comes in
Pauly is offline   Reply With Quote