View Single Post
Old 02-13-2013, 11:22 PM   #9 (permalink)
Iconic Muffinman
Certified Gunsmith
 
Iconic Muffinman's Avatar
 
Join Date: Oct 2008
Location: Middletown, PA

Kilt Fan
ficone, thanks for having me double check that lpk. I shined my work light down in the fitting, and discovered that even though its a 1/4" opening, the hole that was bored through the pipe was only 1/8".

I opened the pipe up the whole way to the 1/4" size Im assuming it should be.

I also replaced every seal in the marker with the seal kit I purchased.

Hopefully, that should resove the issue. I will be updating the thread tomorrow, after I test the marker again.
Iconic Muffinman is offline   Reply With Quote