View Single Post
Old 02-22-2013, 10:40 PM   #2 (permalink)
HurtCow's Avatar
Join Date: Mar 2006
Location: Rocklin, CA
Send a message via AIM to HurtCow

1) The mainspring guide has a threaded end. This is to thread into the link pin that connects the bolt to the hammer. Look at the hole on top of the gun with it uncocked and you'll see the threads of the link pin. Use the mainspring guide to pull it out of the top.

2) A cocker valve should drop right in with no modifications; I've done it before. Check your o-rings.
Everybody loves me!

If I hurt your feelings or otherwise offended you, click here.
HurtCow is offline   Reply With Quote