Thread: T2 questions
View Single Post
Old 03-05-2013, 01:35 PM   #2 (permalink)
Post Whore
Tracker's Avatar
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

threading is 2k

there have been semi T2's with a single ram.. personally i think a single ram is a cop out.. but dual ram cockers dont really exist

there is nothing to hold a front block in place, the front edge is just a rounded out

here are the main issues you are going to have with your project

the ASA doesnt have provisions for a timing rod

the front of the body will need to be made flat (not nesscary, but if you want to keep a front block on steady, it would be worth the trouble)

and the body is rounded on the bottom, so you will either need an adapter plate, or to modify your frame (but that might make the sear go too high into the body). or youll need to cutsom make a frame.. as theres NOTHING from CCM that has a slider plate, and a rounded top

best of luck to you. look forward to seeing what you come up with


^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote