View Single Post
Old 03-05-2013, 02:54 PM   #5 (permalink)
punisher068
MCB Member
 
punisher068's Avatar
 
Join Date: Mar 2009
Location: Santa Cruz Mountains

Quote:
Originally Posted by Skibbo View Post
wow. that looks really nice. how long did it take to cut to cut out the frame? Also, where did you buy the reg from?
Took me about 6 hrs,drilled thru the frame 1st then ran my Dremmel bit on my drill press,finished it off with files and sandpaper.The frame is VERY soft aluminum.I got the reg new from Kee,my teammate is a retailer for them,had to wait 2 months because they were backordered
First time I saw a Mini I wanted to try this,saw a few others had done it successfully so I knew the concept would work
Just sent my Virtue board in to exchange it for an OLED model,Ill need it to RF interface board and Pulse guts in the boxmag
__________________
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
My feedback
http://www.mcarterbrown.com/forums/f...-feedback.html
punisher068 is offline   Reply With Quote