View Single Post
Old 03-13-2013, 03:39 PM   #9 (permalink)
O'Lane
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Quote:
Originally Posted by Bigtuana View Post
So it's essentially a Sterling that uses phantom internals?
Not quite, the lower tube is essentially a phantom body with autococker threads. The upper tube will have a press fit tube into it that will contain the spring feed. The upper tube will also contain a rotating feed block that will utilize a spring/bearing detent to keep the feed block aligned when loading and firing.

On that note though, anyone have any recommendations for an autococker barrel that is freak bored and that will allow a pump to be sleeved over it?
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America
O'Lane is offline   Reply With Quote