So I had my teammates 2011(?) PMR apart for repair and had my DW/Yoda mech kit out of my current build..
I had noticed the current GoG and PMR noid were similar...
I also have a 07 PMR myself,the bolt internals are near identical...
So with the owners permission I decided to mate the two
I had modded my DW\Yoda kit with a Lucky rear fitting for my previous build,fitting mated up good so I aired and tested it
Cycles fine without leaks
The triggerframe seems to have space for the SMAV valve,I think the fittings would need to be changed to newer XE style fittings for clearence between the body and frame,also noticed the triggerframe spacing is very similar
Heres a little vid MAW2p_zpsf1e78e6a.mp4 Video by punisher068 | Photobucket
May have to trade one of my coveted SP8s for a PMR now :P