View Single Post
Old 03-29-2013, 10:43 PM   #2 (permalink)
Cowboy
MCB Member
 
Cowboy's Avatar
 
Join Date: Aug 2006
Location: Waco, Texas

CCM Fan
Brass and Wood Fan
Kilt Club
PPS Fan
RTP Fan
i modified an ion board by unsoldering the noid and wiring in an intimidator noid then i used an ion eye board unsoldered the eyes and wired in timmy eyes and i was using a 2 way ram (it was a single action but i took the spring out and tapped another hole) with dual qevs, in all i had a 22+ bps monster that for the most part looked like a stock 98 lol

as for boards these will work

timmy
ion
shocker (not shoebox)
viking
dm(any year)
t-board
quest
angel
and a few others
__________________
"Speak softly and carry a big stick, if that don't work, start yellin' and grab a shotgun"-Bill engvall.

FEEDBACK http://www.mcarterbrown.com/forums/f...-feedback.html

Last edited by Cowboy; 03-29-2013 at 10:46 PM.
Cowboy is offline   Reply With Quote