View Single Post
Old 03-31-2013, 06:18 PM   #8 (permalink)
Talfuchre
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Okay.

You have brought up a million things here.

1) The back block should simply allow the bolt to move in the breach smoothly. One turn out will be fine - or none - depending on the marker.

2) This shouldn't cause enough occlusion to stop the marker from shooting properly.

3) It could cause the bolt pin to ride on the hammer and slow it down terribly.

4) See if that is the case.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote