View Single Post
Old 04-07-2013, 08:06 PM   #606 (permalink)
Post Whore
punisher068's Avatar
Join Date: Mar 2009
Location: Santa Cruz Mountains

Originally Posted by Chris From Flurry View Post
Punisher thanks for the info.

With the help of Deathwish_DW and Dave from Gog I found out that the Enmey has different size hoses than Ion's and the other guns. The hose from the ASA to the 3way is 5mm OD 3mm ID made from black Nylon and the other hose is 4mm OD x 2.5mm ID urethane.

They said they have to use a special machine to get the black urethane hose on there without breaking the barb and that they could do it for me for my build if I new how long I needed the hose. I think I might just scrap those plans and try to find another way to do it.

It is cool that they offered to put it on for me and that if would only be a few bucks to pay for the hose.
YW,good to know these things,got my 1st XE recently,all other Ion stuff is Gen 1
I put a too small a hose on too big a barb with some boiling water
sometimes Im so redneck...
Nice to see GoG offfered up for a custom build too
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
My feedback
punisher068 is offline   Reply With Quote