Got an sft and it was dropping shots on hugh rates of fire, however, I've been adjusting the reg and dwell to try and get it to work as it needs to.
So far, the reg is set to 150 psi, which I'm sure is low, and I've been trying to set the dwell, however, it hasn't been doing much. Everytime I shoot a re ball, the first shot sputters, and the second shot sends the ball down the barrel.
What do I need to do?
Edit: I have it currently set to 8msc ( 20 chirps from lowest ) and 180ish psi, these are the factory recommended settings.
It's still not even pushing the ball down the barrel.
Last edited by ogti9g9; 04-14-2013 at 03:59 PM.