View Single Post
Old 04-15-2013, 02:40 PM   #6 (permalink)
1shot
MCB Member
 
1shot's Avatar
 
Join Date: Apr 2013
Location: MN

I would also recommend using blue lock tight on the brass bolt that holds the barrel sleeve adapter in place. Also an easy trick to puting the pump handle screws back in is to push a swab style squeegee down the barrel and use it to push the bolt back slightly. This gives you much better acksess to the bolt an you won't strip any screws trying to put them back in. When reassembling the marker connect the bolt and hammer (don't forget the hammer main spring) and install the 3 parts as one. It will be much less difficult to install the valve assembly/ASA when you aren't fighting the hamer main spring. Sorry for all the unsalisated advice, don't mean to offend. Just some tips that I hope someone will find usefull.
1shot is offline   Reply With Quote