View Single Post
Old 04-19-2013, 06:37 PM   #4 (permalink)
Seasoned Member
Join Date: Apr 2007
Location: Silver Springs, Fl

Originally Posted by danssoslow View Post
Spyder valve o rings should work, considering the valve is the same.
Thanks, my buddy gave me a couple today. It had urathane orings on it, so we swapped it out for rubber ones.

Originally Posted by danssoslow View Post
Your bolt doesn't have o rings does it? As most half block bolts I've ever seen don't, I'll assume yours does not; as such, there is going to be some air getting around the bolt. It's going to be much more noticeable in a half block, with such a short path to vent to the outside of the gun.
Mine has two, one before and after the air hole, I swapped them out for tank orings just to be on the safe side, they seemed to lesson the air blowing out the rear to an extent.

Originally Posted by danssoslow View Post
Your shootdown may be due to the reg not being able to keep up. When fired slowly, do you still have that problem?
I have a brand new CP reg on it, so I don't think thats the issue.

Originally Posted by THE Hulk View Post
The Trilogy uses a Merlin Valve. If you want a new valve, AKA or Palmer offer them.
The valve is fine, but I am having issues finding the proper cup seals for it. Everytime I get a new gun, I try to put together a parts kits for it just in case.

crap, almost forgot, Thanks Guys
DamoNAN is offline   Reply With Quote