Thread: Karnivor issues
View Single Post
Old 05-05-2013, 10:16 AM   #1 (permalink)
Rec Poster
Join Date: May 2013

Karnivor issues


I've got a worrblade (e1) karni and I'm just trying to adjust a few things right now on it. Before I started I thought I'd post here and see if anyone wants to offer some advice. There is no air leaking or any other issues, but it seems to me that the back block is hitting the body a little hard making that clacking sound.

Along with that clacking sound, once the lpr is sweetspotted (to the point where it just cocks the gun) the gun makes quite a loud "POP" when shooting. I thought it was just during dryfire since I know it's louder on dryfire than normal so I put a few balls through it. Still making a loud "POP". I'm waiting to get down to a field so I can chrono and adjust hpr to get velocity to the right range too. Any ideas for fixing this popping noise? Or is it normal? (I can probably get a video of it with audio in the next few days.

Does anyone in the GTA area know where to get some o-ring kits for the karni? I may have to replace a few later on this summer.

MrCris is offline   Reply With Quote