View Single Post
Old 05-07-2013, 10:15 PM   #2 (permalink)
Rainman229
done
 
Join Date: Apr 2006
Location: nj
Send a message via AIM to Rainman229

Buy your self a new rod. Then the trick to threading them for half block is don't cut first. Run the die down to past your cut point. Yes this means cutting a lot of useless threads. But the existing threads are true on the rod. So your start point is true. Then cut it. And clean the end. Now your left with a half block cocker rod.
__________________
Email lastone75@aol.com

Making paintball fun again

feedback http://www.mcarterbrown.com/forums/s...ght=rainman229
Rainman229 is offline   Reply With Quote