View Single Post
Old 05-13-2013, 08:25 PM   #5 (permalink)
SeuDog
Active Member
 
Join Date: Mar 2009
Location: Honolulu, Hawaii

When you lay it on the left side, take a look and see if the auto trigger cam (not the screw but the barrel that slides into the grip frame) drops out of the trigger frame. When this happens, you will have that effect. CCM started putting pins in the trigger frame to prevent the cam from moving and this from happening.

There are other fixes in older grip frames that don't have the pin or ball bearing on a spring.
SeuDog is online now   Reply With Quote