View Single Post
Old 05-15-2013, 06:55 PM   #5 (permalink)
Draxxusc3
Newbie
 
Join Date: May 2013
Location: Mililani Hawaii

for the cp triggers on the DM7/8, I've had to sand down where it's making contact on the upper part of the trigger, should be right above the bearing where it's making contact. Had the same issue on both my wife's and my own personal markers. First time I ran into the issue was in the DM7... see if you can't find where it's snagging (like I said, it should be right by the bearing) and see if it's feasable for you to sand it down to make it work. I've managed to do so on mine, since the rake trigger from cp is my favorite, and I refuse to go elsewhere. Let me know what you find please, if you can't see the problem there, let me know and I'll take mine apart to verify what I had to do.
__________________
CCI Phantom - No Mods
DYE DM8 - Virtue Board, TechT bolt, CP Rake Trigger
DYE DMC - No Mods
DYE DM7 - Virtue Board, BeOranged bolt
Dangerous Power G3 - TechT bolt, CP Reg
Planet Eclipse EGO 6 - Slightly modded trigger frame for big fingers...

WTT DMC/EGO 6/ or G3 for a Dust black CCM S6 (No mods, don't need barrel) Pst me if you're willing to do a trade, will add if needed.
Draxxusc3 is offline   Reply With Quote