View Single Post
Old 06-05-2013, 07:42 PM   #2 (permalink)
stemmy
Active Member
 
stemmy's Avatar
 
Join Date: Aug 2010

you can mill it down until you reach the valve body but as to how much farther that is for you, I cannot say. in an autococker, no air is directed towards the hammer so it shouldn't have any affect of air consumption.

im not sure why you would want/ need to do this but as long as you don't mill into where the valve body or oring is, it shouldn't be a problem
__________________
My feedback
http://www.mcarterbrown.com/forums/f...-feedback.html

originaly posted by evilkid94

Quote:
That would be a Spyder-majigger-peiceofcarp-locktite-marker
originaly posted by legolas
Quote:
Nothin' like eliminating an electowizzbangdildo wielding opponent with mid-80's technology
Quote:
Quote:
Originally Posted by chopper duke
Naked Nuns with Big Guns. It has two of my favorite words in the title!
You gotta thing for big nuns too, eh?
stemmy is offline   Reply With Quote