JT ER2 pump pistol plans
i have one sitting in my basement in pieces trying to figure out what to do with it. I figure I will slip a freak insert in the barrel to give it a tighter bore match. heard all you have to do is heat it up with a hair dryer or heat gun and tap it in. then I want to run it constant air by getting a spyder style vertical air asa and putting a CP reg in the slot where the co2 cartridge goes so I can adjust the pressure for velocity. next time to decide if I want to run it on a remote like my tpx or try and rig up an asa on the bottom to run a 13 ci tank off it. I still have to fix my power tube as I tried to drill it out larger to allow more air flow and now it has a hole half way down the length. would rather have a metal one anyways. just looking for a fun pump to use in open play as I have grown tired of kicking butt with my works pump.
God created Police so Firemen would have HEROES
In God we trust, everyone else gets searched
9mm will make you weak!
MY FEEDBACK http://www.mcarterbrown.com/forums/f...-feedback.html
CCM Works Sniper, Thumper, Kingman Hammer Low Pressure with Vertical ASA, TPX, Ion mech/closed bolt