Thread: G10 45 panels
View Single Post
Old 06-11-2013, 02:11 PM   #7 (permalink)
Spider!
MCB Member
 
Spider!'s Avatar
 
Join Date: Dec 2008
Location: Houston, TX

Quote:
Originally Posted by CCMachinist View Post
The material machines ok . It is harder on tooling. The machine time is about the same as delrin.
here is some info:

G10 fiberglass boards are made of a special glass epoxy laminate that has extremely high strength. G10 fiberglass is used in marine applications due to its superior strength, moisture resistance, and excellent electrical and fire insulation.
Fiberglass boards make excellent non-corrosive backing plates for high load deck hardware or bond to engine room bulkheads to hold mounting brackets. G10 boards are sold in 1/4 and 1/2 inch thickness.

G-10 is similar in strength and density to starboard, but because it is formed from epoxy resin, it bonds easily using most two-part epoxies.
Also used in large railguns as a rail backer.

I really like natural G10. Quaint looking, like canvas phenolics, but a whole other level of mean. I'm not a fan of flat panel 45 grips, but I'll be thinking about something to put these on.
__________________
My Feedback
Spider! is offline   Reply With Quote