View Single Post
Old 06-12-2013, 10:22 AM   #4 (permalink)
Stitch
Pump Dinosaur
 
Stitch's Avatar
 
Join Date: Dec 2007
Location: in a van, by the river

ok - next thing to check is your pump arm rod - if it is turned in too far it might do that too - and may be hitching in - have you tried turning that rod and nut out a bit? also make sure that the nut has the rod seated in straight - its easy to be just slightly off - but the auto trigger part can be caused by it being pulled forward just far enough to trigger the sear early.
__________________
Stitch FC
www.final-chapter.org

my mcb feedback
Stitch is offline   Reply With Quote