View Single Post
Old 06-25-2013, 07:08 AM   #2 (permalink)
MCB Member
moonweasel's Avatar
Join Date: Dec 2009
Location: Kiwiland again

One of two things I can think of, either the poppet is sticking or the little piston in the noid is sticking. You can carefully open the noid and free it, from memory, I'm sure there is a small opening in the bottom of the noid where your smallest allen key (hex key) will fit to just give it a nudge, 99% sure I did that when my mini decided to do the barrel leak thing.
If you open it be very careful those screw heads are rather soft and can strip easily.
My memory may be a little hazy, my Minis have been in storage and it's been about three years since I opend one up.
moonweasel is offline   Reply With Quote