It is unfinished due to lack of free time and prior obligations. Figured I would throw a few pictures up anyhow, Just to show where I am at this point. Its all dremel and Drill press work, and its not finished at that...so excuse the rough look please.
Its amazing what you get when you cross a Viewloader Genesis, A $5 desk lamp from Goodwill and an old shower curtain rod. I will still finish this just to use it in a few games and show it off.
Once complete it is getting an old school rat rod paintjob, Flat black with red and silver Highlights. I plan on including the 4 suits from a deck of cards in silver with the phrase "All In" stenciled behind/ through them.
O.K. Enough talk, Here are the photo's
The Concept drawing
The execution, the hammer is already slotted (you'll see that Down below)
I cut the feed tube from an old Shower curtain rod that was in the shed..10 round tubes slide right in until they hit the 2 rings near the top..Then Friction hold it in.
The Lever connection point, I removed the safety and used the hole to bolt the bracket to .The Bracket is made out of an old door stop I had laying around and one of the hinge points from the $5 desk lamp.
