View Single Post
Old 07-24-2013, 12:35 PM   #851 (permalink)
punisher068
MCB Member
 
punisher068's Avatar
 
Join Date: Mar 2009
Location: Santa Cruz Mountains

Ive tried to fit DW/Yoda kit into my SP1 recently.Not much space inside for a bracket and trigger geometry is very different.
Wondering if an Ion or PMR trigger could be fit inside the frame to change that.
Someone here at MCB has put an Ion triggerframe on a SP1,noticed myself it could work if the slot where the reg and reg bracket was enlarged a bit.Since the Ion frame has a reg mount built in it would eliminate the stock SP1 reg&mounting setup
My SP1 is shooting so well Im hesitant to hack it up
__________________
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
My feedback
http://www.mcarterbrown.com/forums/f...-feedback.html
punisher068 is offline   Reply With Quote