View Single Post
Old 10-30-2013, 09:35 PM   #22 (permalink)
Invert
Pirate #187
 
Invert's Avatar
 
Join Date: Feb 2011
Location: Nashville, TN

I solved the flimsy ear protection issue by going to the local craft store, and buying a sheet of 10mm thick black craft foam. It's the same stuff as the original ears, just twice as thick. Used the original ear for a template, cut it with a X-acto knife, did a little hole punching with a leather punch so it removed the center of the holes, and put it on like the old ears. I can hear, and they are comfortable, and an ear shot is a minor annoyance. The fact that I spent about 3 bucks and an hour on the whole project didn't hurt either...
__________________
Invert is offline   Reply With Quote