View Single Post
Old 11-22-2013, 02:24 AM   #3 (permalink)
newmaticarsenal
Active Member
 
newmaticarsenal's Avatar
 
Join Date: Oct 2008

I did cock it.
It holds gas till the hammer falls and then the valve stays open.

Seat was Translucent Urethane. I damaged it and have been tying to get it to work with a green O-ring. I have urethane O-Rings coming in both 70 and 90 duro. Which do you recommend?

I also replaced the 010 on the power tube with a new urethane 010.

Are the delrin seats O-rings or flat washers? Do they work better? I've got black and brown ATF Delrin I can turn on my lathe.
newmaticarsenal is offline   Reply With Quote