View Single Post
Old 09-07-2006, 07:42 PM   #5 (permalink)
Al Ray
GWC Lifetime Member
Al Ray's Avatar
Join Date: Mar 2006
Location: Grand Junction, Colorado

If your ranger was equiped with an adjustable bolt(most were IIRC) Remove the barrel, in the center of the bolt you'll see that its cut hexagonaly for an allen wrench. Turning that part of the bolt clockwise with the allen wrench will increase mainspring tension, turning it counterclockwise will decrease mainspring tension. You can also get any standard nelson spring kit and swap out main and valve springs to dial in you gun perfectly. Just keep in mind that a Ranger is just another nelson and you'll be fine.
Al Ray is offline   Reply With Quote