Originally Posted by wd3d
Will these work with any of the mag valve? I have a minimag.
Originally Posted by Frizzle Fry
Generally yes, but some aftermarket bodies don't take Level 10 bolts without modification (Gen2 PTP Micromags, Boxer/V2 Automags, etc) or may need custom length springs (Gen6 PTP Micromags, Galactic Z, etc) so it really depends on the level of craftsmanship and quality control at Gearheadz.
Considering that the measurements were taken off of one of my ULE bodies and rails and assuming that the engineer that took these measurements knows what he's doing (he's only got a 30+ year reputation for one of the best pump markers), then yes, I'd say that these bodies are compatible with any of the mag valves.